How to get "Eden Life Network" on your free to air sattlelite tv channels
- 1. Press "Menu" button.
- 2. Move down to "ADVANCE OTIONS" and press "OK"
- 3. On "DISH INSTALLATION" select and press "OK"
- 4. Enter PIN code "9949"
- 5. On "DISH INSTALLATION" menu press "2" for "NETWORK CONFIGURATION"
- 6. Move down to "NETWORK CONFIGURATION" and press "OK"
- 7. Move down to NETWORK 3 SETUP" and press "OK"
- 8. On "SIGNAL SETUP" press "OK" and then right arrow to change "SIGNAL DETECTION" to "OTHER"and press "OK" on OTHER. The SATTELITE NAME to be IS7/10
- 9. Set Frequency to 12682
- 10. Set Symbol rate to 26652
- 11. Set FEC to ½
- 12. Set Polarization to HORIZONTAL
- 13. Press "OK" to fix. Set Use Nit to "NO"
- 14. Move down to "ACCEPT THESE SETTINGS" and press "OK"
- 15. Press "EXIT" to return to "DISH INSTALLATION" Menu
- 16. Move down to "SCAN NEW NETWORK" (or if not available) "SCAN ALL NETWORKS" - This may take several minutes. Wait till new screen displays.
- 17. Press "TV" button and move down to "Public PAS 7/10 and press "OK"
- 18. Press "P+" or "P-" until you find "Eden Life"
- 19. Remember your "TV" button enables you to switch between D-STV or other networks.
For HOPE TV:
Same as above but:
- Frequency 12722
- Symbol rate 26652
- Polarization "Vertical"
If no success, repeat steps 1 - 4 then do steps 12 - 14
